|Fabriqué en France||Yes|
The Black RMS ribbon is specially designed to print your badges on PLA (polylactic acid) and wood cards.
A ribbon not quite like the others
This RMS (Multi Surface Resin) tape takes its name from the overlay affixed to the classic PET tape. The special formulation of this ink layer has been designed to ensure perfect print quality.
It can print all types of barcodes, very small texts and logos with intense blackness. It also offers very good heat resistance.
This ribbon can produce up to 500 prints.
RMS Black Ribbon + PLA/Wood Cards
“Classic” ribbons do not allow quality printing on PLA/Wood cards. The printings are difficult to read and do not hold up over time.
The Black RMS ribbon has therefore been designed to specifically adapt to these cards and offers a durable and very good quality print.
This ribbon + card combination therefore offers a very good alternative for users who wish to make their own badge while reducing their plastic consumption.
Adapted to Edikio solutions
Edikio solutions : all-in-one packs to create and print attractive price tags simply and quickly. These solutions are intended for 2 types of market:
- Edikio PriceTag for catering and catering
- Edikio Guest for hotels and restaurants
We offer 2 models:
- Black RMS for Edikio Access (PriceTag or Guest)
- Black RMS for Edikio Flex (PriceTag or Guest)
For both models, an update of the Edikio Printer Suite software and firmware will be required.
Ribbons remain usable for up to 1 year after purchase, if stored in a cool, dry environment and their original packaging is unopened. The storage temperature should be between 5 and 25°C and the relative humidity around 50%. After opening, avoid dust, direct sunlight, humidity and high temperatures. Do not place near solvents or other chemicals.